20160206

CALL FOR PAPERS





​IJRECE: A Unit of I2OR
International Journal of Research in Electronics and Computer Engineering
ISSN: 2348-2281 (ONLINE) | ISSN: 2393-9028 (PRINT)

Scientific Journal Impact Factor = 2.918
Publication Impact Factor = 3.025
Directory of Science Score = 11.26
Global Impact Factor = 0.241
InfoBase Index = 2.9

Website and Email for Submission


IJRECE cordially invites you to submit your Research Work whether it is Research or Review Paper for publication in Current Issue: Vol.4 Issue 1, Jan. to March 2016of our quarterly publication: International Journal of Research in Electronics and Computer Engineering.

Salient Features
  • Strict Plagiarism policy
  • Peer Reviewed Journal
  • Open Access Journal
  • Reputed Editorial Board
  • Rapid/Fast Track Publication
  • Fully Archived Journal
  • High Visibility and Indexing
  • Aimed to be a High Impact Journal
  • Nominal Processing and Publication Charges (INR 1500/ 80 USD only)
Important Dates
Submission Window is open for the IJRECE Vol.4 Issue 1 Jan.-March 2016
Submission Period: 25th December to 10th March 2016
Review Period: 5 to 10 Days

Publication of Paper: Within 5 to 10 Days after Registration

You can mail your manuscripts to the Chief Editor at:  ijrece.i2or@gmail.com


Indexing @ IJRECE




With Sincere Regards
Acquisition Editor

Dear Sir / Madam,
We are Pleased to inform you that we are into manufacturing of all types
of moulded & Extruded Rubber Products since 1962.

We work on order basis & Customer specification in all type of rubber polymer products like-NaturalNeoprineNitrileEPDM, SiliconVitonEbonite, SynaprinFKM, HNBR, Hyplone , Butyl , Chloropreneetc. If you have requirement of any rubber product, please provide us available / sample / dimension / drawing / specification / photo and required quantity & application of products so that we can provide you the quotation ASAP.

In our company it is possible to manufacture trolley wheel / bush / Oil seal / O-ring / Flange gasket / chevron seal / flat gasket  single piece without joint in any polymer as per customer requirement from 1 mm to 6000 mm (6 Meter) O.D. 

Also it is possible to manufacture rectangular / square  sheet / transformer tank cover gasket etc. up to  6 mtr x 6 mtr. in any thickness single piece without joint.
We can also do the rubber coating on metal roll up to  6 mtr. length & 1 mtr. O.D. 
And Rubber Lining in Chemical Tanks & Pipes.
You will be surprised to know that till now our Company has developed more

than 15,000 different types of rubber Products.

See Glimpses of some Rubber Products in Our Range in the attachment
 ( Used in Different Types of Industries )

 lf you & any Person in Your Contact required Rubber Product then
 forward Our Mail to them We will be Very thank full for that .

Regards,
Pooja Morya
( Business Development Executive )
International Rubber Industries
Plot No.13 Sector B Ind.Area Sanwer Road ,
Near Pahwa Rubber Industries  Indore (M.P.) India
 
Cont.   : 0731- 2721458 / 2721459 / 78986-71569


Dear Author/Researcher/PG Scholar,
INTERNATIONAL JOURNAL OF INNOVATIVE SCIENCE, ENGINEERING ANDTECHNOLOGY (IJISET, ISSN 2348 – 7968),
Invites you to submit your research paper for publishing in Volume 3, Issue 2 (February - 2016).
 CALL FOR PAPERS VOLUME 3, ISSUE 2
Subject Category:  Cover all branches of Engineering, Technology and Science.
Important Dates:
·Paper Submission:   20 February 2016
·Review Replay (Acceptance/Rejection) Notification: Within 02 Days after submitting paper.
·Published Online on: 22 February 2016
Publication Charges:
Rs 1500/- Paper/Article
Rs 300/- Author for Hard Copy of Certificate.
$50 USD -  Author out of India 
Submission Procedure:
Manuscripts are invited in MS Word format and to be submitted via mail on editor@ijiset.com, (or) editor.ijiset@gmail.com,
Please note that Review Papers/Articles are also acceptable. 
Once a paper is accepted, authors are assumed to cede copyrights of the paper over to IJISET. All papers will be acknowledged and referred.

 PAPER SUBMISSION DEAD LINE:
Each full text paper (.doc) along with the corresponding signed copyright transfer form should be submitted by Email: 
For any Query,  contact at: editor@ijiset.com
Note:
If you receive the acceptance letter, after you are sending the copy right form and payment form your paper will be published in our journal immediately even before the date of submission.
With Thanks & Regards,
Editor in Chief

Facts That Were Already Proven False By Science

MYTH: The sun is yellow. 1 You'd be forgiven for thinking the afternoon sun looks yellow — but the light it gives off is techn...